Capacitive Sensors – Part II

Written by: Bjoern Schaefer

In a previous post we saw the myriad of different applications capacitive technology is involved in. We will discuss today the underlying physical principles of these sensors.

Figure 1 shows a normal plate capacitor, in which two conductive plates of equal size (A) oppose each other in distance (d). Once a voltage is applied to both plates, an electric field will exist between them. Depending on the so called dielectric in between, the electric field will hold a certain amount of electrons captured within. Capacitance refers therefore to the capacity to store and hold this electric charge.

Figure 1: Plate capacitor

Figure 1: Plate capacitor

Figure 2 shows a typical electrode design of a capacitive proximity sensor. The formerly opposing plates have now circular shapes and lie within small proximity on one layer.

Figure 2: Capacitive Sensor Electrodes

Figure 2: Capacitive Sensor Electrodes

The capacitance can be measured by determining the amount charge necessary to reverse the polarity of the conductive plates. The more energy the system needs, the higher the underlying capacitance value.

The following formula reveals the relationship between the plate distance, size and dielectric material properties on the capacitance value.

Formula 1: Formula of a plate capacitor

Formula 1: Formula of a plate capacitor

C is the capacitance, in farads;
A is the area of overlap of the two plates, in square meters;
εr is the relative static permittivity (sometimes called the dielectric constant) of the material between the plates (for a vacuum, εr = 1);
ε0 is the electric constant (ε0 ≈ 8.854×10−12 F m–1); and
d is the separation between the plates, in meters.

In the next part we will discuss implications of the formula and the ways capacitive sensors can detect physical changes.


Share/Bookmark

This entry was posted in Capacitive Sensors and tagged , , , , , , . Bookmark the permalink.

2 Responses to Capacitive Sensors – Part II

  1. Pingback: Capacitive Sensors – Part III « SensorTech

  2. Pingback: Part I – Capacitive Sensors «

What do you think?

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s