Ultrasonic Sensors with Analog Output

Many times in an application we need more than a simple discrete on/off output. For a more accurate detection mode we can utilize analog outputs to monitor position, height, fill-levels and part presence typically found in object detection assemblies. When utilizing Ultrasonic sensors with an analog output we can simply measure the distance value that is proportional to the distance of our target within the operating range of the sensor. Typically 0…10V or 4…20mA outputs are available with the option of rising or falling characteristics. Rising and falling is a way to invert the view of the output, so 0…10V would simply be inverted to 10…0V or 4…20mA would be 20…4mA.

Ultrasonic sensor offerings are a great alternative as they can deal with difficult targets that are typically a challenge for other sensor technologies. They also offer very good resolution with the options of long and short range detection. Below is an example of a 4…20mA linear output. As you can see the closer our target gets to the sensor face it indicates an output closer to 4mA and the further away from the sensor it will provide and output closer to 20mA. For more information on Ultrasonic sensors, click here.

AnalogUltrasonic

About Shawn Day

Balluff Inc. Market Manager ~ Object Detection
This entry was posted in All posts, Ultrasonic Sensors and tagged , , , . Bookmark the permalink.

One Response to Ultrasonic Sensors with Analog Output

  1. Pingback: Ultrasonic Sensor Reflection Targets | SENSORTECH

What do you think?

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s