IO-Link Sensors in Tire Manufacturing

Much has been written here on Sensortech about IO-Link, and the advantages that an IO-Link-based architecture offers. In this article, we’ll take a look at a specific application where those IO-Link advantages are clear.

Tire manufacturing machinery in general, and tire curing presses in particular, incorporate numerous sensors and indicators that contribute to machine efficiency. As an example, tire curing presses often use magnetostrictive linear position sensors for feedback and control of mold open/close. Overwhelmingly, sensors that provide an analog, 4-20 mA signal are used. But maybe there’s a better alternative to typical analog feedback.

As discussed HERE and HERE, migration away from typical analog sensor signals to network-capable IO-Link interfaces makes a great deal of sense in many areas of application.

In a tire manufacturing operation, there are typically numerous, essentially identical curing presses, lined up in a row, all doing essentially the same job. Each press uses multiple analog position sensors that need each need to be connected to the press control system. As with pretty much analog device, the use of individual shielded cables is critical. Individual shielded cables for every sensor is a costly a time-consuming proposition. An Engineering Manager at a machine builder told us recently that wiring each press requires around 300 man hours(!), a significant portion of which is spent on sensor and indicator wiring.

Which brings us to IO-Link. Replacing those analog sensors with IO-Link sensors, allows feedback signals from multiple machines to be consolidated into single cable runs, and connected to the network, be it Ethernet/IP, EtherCat, Profinet, or Profibus. The benefits of such an approach are numerous:

  • Wiring is simple and much more economical
    • Eliminates need for shielded sensor cables
  • Integrated diagnostics allow remote machine status monitoring
  • Reduces more expensive analog IO on the controller side
  • Over-the-network configuration and the ability to store those configurations reduces setup time

And, by the way, the IO-Link story doesn’t end with position sensors. The ever-growing list of IO-Link enabled sensors and indicators allows the benefits to be rolled into many areas of machine automation, such as:

  • Intelligent IO-Link power supplies with HeartBeat technology that monitor their own “health” and report it back over the network (think Predictive Maintenance)
  • Highly-configurable IO-Link stack light alternatives that can be set up to display a number of machine and process condition states
  • IO blocks, memory modules, pressure sensors, discrete (on/off) sensors of all type, and more

To learn more about IO-Link, visit Balluff.com

This entry was posted in All posts, Linear Position and Distance Measurement and tagged , , , , , , . Bookmark the permalink.

One Response to IO-Link Sensors in Tire Manufacturing

  1. Tom Maley says:

    Well done Scott. Customers implementing IO-Link are gaining competitive advantage over their competition.

What do you think?

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s