Most Popular Posts
- Industrial Sensing Fundamentals – Back to the Basics: NPN vs PNP
- Basic Operating Principle of an Inductive Proximity Sensor
- Back to the Basics – How do I wire my 3-wire sensors?
- Analog Signals: 0 to 10V Vs. 4-20 mA
- Photoelectric Basics - Light On or Dark On
- Back to the Basics: How Do I Wire a DC 2-wire Sensor?
- Flush or Non-Flush - What's the Difference?
- Which cable jacket is best for your application?
- Inductive Proximity Sensor Targets - Material does matter
- Resolution, Accuracy, and Repeatability
Connect with us
Contact usBalluff, Inc.
8125 Holton Drive
Florence, KY 41042
Awards & Recognition
Tag Archives: hydraulic cylinder
In the current era of steel production, steel manufacturers employ a continuous process during the casting phase of production. The molten steel is solidified during this process by a continuous casting machine. The processes include feeding the liquid steel through … Continue reading
When maintenance technicians replace linear position sensors (also known as probes or wands) from hydraulic cylinders, it can leave a terrible mess, waste hydraulic oils, and expose the individual to harmful hot fluids. Also, the change out process can expose … Continue reading
Our modern technological society owes a lot to the scientific work and inspiration of a 17th-century French mathematician and physicist, Blaise Pascal. Pascal was a pioneer in the fields of hydrostatics and hydrodynamics, which deal with the subject of fluid … Continue reading
In a previous Sensortech post entitled “Hydraulic Cylinder Position Feedback“, we discussed the basic concept of hydraulic cylinder position feedback. In case you might have missed that post, here it is for an encore appearance. Magnetostrictive linear position transducers are commonly … Continue reading
Some industrial applications will require a sensor with special properties. This type of sensor offering is needed especially when pressure comes to play. In a wide range of hydraulic cylinder and valve applications high pressure sensors are exposed to hostile … Continue reading
Today’s petrochemical and process industries, like most industries, are striving to increase their capabilities of automation & control, coupled with condition monitoring, across their entire operation. Demands for uptime are increasing and the focus on reliability through redundancy and prediction … Continue reading
In a previous installment here on SENSORTECH, we explored the three M’s of linear position feedback application (Linear Feedback Sensors – The Three M’s). One of those three M’s stands for Motion Control. When we talk about motion control applications … Continue reading
I recently ran across an interesting article that explored some of the factors involved in selecting hydraulic cylinders. The article, entitled “3 Steps to Choosing the Right Hydraulic Cylinder” was very informative and helpful. But what if you need a … Continue reading